S8610

Category

DESCRIPTION

DESCRIPTION

Hardware Feature
Total Number of Slots 13
Number of Line Card Slots 10
Number of MPU Slots 2
Switching fabric module Slots 1
Hot Swapping Yes
Console Port 1 × RJ45 console port
1 × Micro-USB port
Power Supply Not included
Min: 3
Max: 6
100-240V AC 50-60 Hz (Internal)
Power Consumption Idling: 30W
Full load: 2430W
Operating Temperature 0°C to 45°C (32°F to 113°F)
Operating Humidity 5%RH–95%RH
Storage Temperature –40°C to 70°C (–40°F to 158°F)
Redundancy Redundant MPUs, power modules, and fan trays
Performance
Layer Layer 3
Managed Yes
Switching Capacity 256 Tbps
Packet Forwarding Rate 8400 Mpps
Jumbo Frame 10000 Byte
Features
Ethernet IEEE 802.1P(CoS priority)
IEEE 802.1Q
IEEE 802.1ad (QinQ), selective QinQ and Vlan mapping
DLDP
LLDP
Static MAC configuration
Limited MAC learning
Port mirroring and traffic mirroring
Port aggregation, port isolation, and port mirroring
IEEE 802.1D (STP)/802.1w (RSTP)/802.1s (MSTP)
IEEE 802.3ad (dynamic link aggregation), static port aggregation, and multi-chassis link aggregation
RRPP (Rapid Ring Protection Protocol)
Jumbo frame
SuperVLAN
PVLAN
Multicast VLAN+
MCE
Routing Static routing, RIP, OSPF, IS-IS, and BGP4
IPv4/IPv6 ECMP
VRRP
IPv4/IPv6 Policy-based routing
IPv4/IPv6 Routing policy
IPv6 static routing, RIPng, OSPFv3, IS-ISv6, and BGP4+
VRRPv3
Pingv6, Tenetv6, FTPv6, TFTPv6, DNSv6, and ICMPv6
DHCP DHCP Client
DHCP Snooping
DHCP Snooping option82
DHCP Relay
DHCP Server
DHCP auto-config
IP routing 12K IPV4 routing entries
Static routing
RIPv1/v2 and RIPng
OSPFv1/v2/v3
BGP and BGP4+ for IPv6
IS-IS
VRRP/VRRPv3
Mirroring Flow mirroring
N:4 port mirroring
Local port mirroring and remote port mirroring
Multicast PIM-DM, PIM-SM, PIM-SSM, MSDP, MBGP, and Any-RP
IGMP V1/V2/V3 and IGMP V1/V2/V3 snooping
PIM6-DM, PIM6-SM, and PIM6-SSM
MLD V1/V2 and MLD V1/V2 snooping
Multicast policies and Multicast QoS
IRF IRF2
Distributed device management, distributed link aggregation, and distributed resilient routing
Stacking through standard Ethernet interfaces
Local device stacking and remote device stacking
Security Hierarchical user management and password protection
AAA authentication support
RADIUS authentication
HWTACACS
SSH2.0
Port isolation
802.1X authentication, centralized MAC authentication
Port security
IP Source Guard
HTTPs Hierarchical user management and password protection
802.1X authentication and centralized MAC address authentication
Guest VLAN
Portal authentication
DHCP snooping
Dynamic ARP detection
BPDU guard and root guard
uRPF
IP/Port/MAC binding
Plaintext authentication and MD5 authentication for OSPF and RIPv2 packets
Public Key Infrastructure (PKI)
ACL/QoS Standard and extended ACLs
Ingress and egress ACLs
VLAN ACLs
Global ACLs
Diff-Serv QoS
SP, WRR, SP+WRR, CBWFQ
Traffic shaping
Congestion avoidance
Priority marking and remarking
802.1p, TOS, DSCP, and EXP priority mapping
System Management Loading and upgrading through XModem/FTP/TFTP
SNMP v1/v2/v3
sFlow
RMON
NTP clocks
Fault alarm and automatic fault recovery
System logs
Device status monitoring mechanism, including the CPU engine, backplane, chips and other key components
Network Management Command line interface (CLI) configuration
Telnet remote configuration
Configuration via console port
SNMP v1/v2/v3
System log
Power, fan, temperature alarm
HA 1+1 redundancy for key components such as MPUs
1+1 redundancy for power modules
Passive backplane
Hot swapping for all components
Real-time data backup on active/standby MPUs
CPU protection
VRRP
Hot patching
Ethernet OAM (802.1ag and 802.3ah)
RRPP/ERPS
VCT
Smart-Link
ISSU
General
Thunderproof Common mode: 2kV
Differential mode: 1kV
Fully loaded weight 64.5 kg (142.20 lb)
Gross Weight 90.5 kg (199.52 lb)
Product Dimensions 620 mm × 440 mm × 660 mm (24.41″ × 17.32″ × 25.98″ )
Packaging Dimensions 870 mm × 790 mm × 870 mm (34.25″ × 31.10″ × 14.57″)

SUBMIT YOU Queries